Every engineer on the ship knows the importance of oily water separator (OWS) and must have heard stories of legal actions taken against seafarerswho tried to fiddle or bypass the automation system of the OWS.
The most common cause of people tampering with oily water separator is the deterioration of the performance of the system.
Apart from the filter getting clogged due to continuous usage, there can be many other reasons for the lack of performance.
A fewcritical points, which are often ignored and less commonly known to engineers operating oily water separator on daily basis, are discussed in this article to ensure efficient performance of oily water separator(coalesce filter type) used onboard ships:
1. Oil In Bilge: The separator is suitable for separating a small quantity of oil in the bilge and not the other way round. If there is a mixture consisting of a small quantity of water in oil, better not to pass it through the OWS and directly transfer it to waste oil tank for sludge disposal to shore or for incineration.
2. Keep Viscosity in Limit: Highly viscous oil if supplied for oily water separation will clog the filter. It is important to keep the viscosity of the oil within 1000 mm2/s
3. Discharge Outside Separator: Never discharge or drain water-oil mixture from the separator abruptly out of OWS as it will lead to the separated oil adhere to coalescers, making it inoperative. Ensure to discharge the collected separated oil outside the separator and clean the internals of the OWS by supplying water.
4. Install Dust Filter: While using OWS for discharging bilge mixture containing dust and sand (a coarse-grained entity), it will be difficult for the coalescer filter to pass dust and sand due to their sizes. This will reduce the operating hours of the filter and in-turn the efficiency of the OWS. The ideal service life of the filter normally ranges from 1-2 year depending upon the manufacturing process, considering the daily operation of one hour. It is advisable to install a dust filter in the inlet line of the OWS to avoid this trouble.
5. Exchanging Probe for Fault Finding: In most of the 15ppm OWS models, the oil level detecting probe and transmitting converter in the 1st and 2nd stage chamber are identical. In the event of trouble, exchange these with each other, between the chambers, as this will help in finding outthe source of trouble quickly.
6. Keep Check On Heating Device: If a heating device is provided, ensure it is ON when OWS is in operation and switched OFF before OWS is stopped. In case when the OWS is run for a long time, keep a track on the heater for overheating of coils. If the separator is overheated to a high extent, there may be some production of inflammable gases inside.
7. Protect Internal Coating: The OWS internals are applied with tar epoxy coating, which is inflammable. Avoid bringing fire near to it or perform welding over the surface or body as the heat generated will damage the coating, making OWS susceptible to corrosion
8. Check Water Level: Ensure that the separator is initially filled with seawater before the bilge mixture is supplied to it. This is to increase the life of filters and also to maintain the operational efficiency of the separator
9. Prevent Leakage: Ensure the means provided to avoid leaking or flowing out of water due to siphon effect. Failure to do so will allow the oil to flow in the secondary chamber highly affecting the treatment capability of the machine and clogging the 2nd stage filters
10. Check Effluent: Frequent checks on effluent to be done to assess the performance of the separator. If the effluent is found contaminated, immediately stop the separator and take preventive actions
The operator of OWS should be thorough about the system, design, piping arrangement and of course the operating procedure of oily water separator. Out of all the machinery systems, OWS is kept at high priority due to stringent rules and regulations attached to it for ensuring environmental compliance. Hence it is important for the ship staff to maintain this machine in best of its shape.
Over to you..
Do you know any OWS maintenance tips that should be added to the list?
Let’s know in the comments below.
Disclaimer :
The information contained in this website is for general information purposes only. While we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this website.
Online courses for the Maritime industry!Marine Insight Academy
Online course
Oily water separator
- Regulations and Requirement
- Construction & Operation
- Efficient Operation
- Factors affecting OWS operation
- Design Factors
Learn More About This Course
![10 Oily Water Separator (OWS) Maintenance Tips Every Ship Engineer Must Know (3) 10 Oily Water Separator (OWS) Maintenance Tips Every Ship Engineer Must Know (3)](https://i0.wp.com/www.marineinsight.com/wp-content/uploads/2023/12/Oily-water-Seperator-600x343-1.jpg)
Marine Insight Academy
Online course
Oily water separator
- Regulations and Requirement
- Construction & Operation
- Efficient Operation
- Factors affecting OWS operation
- Design Factors
Learn More About This Course
Disclaimer :
The information contained in this website is for general information purposes only. While we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk.
Related Articles
Properties Of Membrane Tanks For Transportation Of LNG Cargo On Ships
What is Equasis Shipping Database?
10 Biggest Ship Propellers in the World
Do you have info to share with us ? Suggest a correction
Daily Maritime News, Straight To Your Inbox
Sign Up To Get Daily Newsletters
Join over 60k+ people who read our daily newsletters
By subscribing, you agree to ourPrivacy Policyand may receive occasional deal communications; you can unsubscribe anytime.
![10 Oily Water Separator (OWS) Maintenance Tips Every Ship Engineer Must Know (9) 10 Oily Water Separator (OWS) Maintenance Tips Every Ship Engineer Must Know (9)](https://i0.wp.com/www.marineinsight.com/wp-content/uploads/2018/09/anish.png)
About Author
An ardent sailor and a techie, Anish Wankhede has voyaged on a number of ships as a marine engineer officer. He loves multitasking, networking, and troubleshooting. He is the one behind the unique creativity and aesthetics at Marine Insight.
Read More Articles By This Author >